Speed Slot® Tuff TOOTH™ Bi-Metal Variable Pitch Hole Saw, 1-3/4 Inch Dia, 1-7/8 Inch Cutting Depth, 4/5 TPI
Speed Slot® Tuff TOOTH™ Hole Saw, Bi-Metal, Variable Pitch, 1-3/4 Inch Dia, 1-7/8 Inch Cutting Depth, 4/5 TPI, 1/4 Inch Dia x 3-1/2 Inch L Drill, High Speed Steel Cutting Edge, Kerf Tooth, 95 - 295 Rpm, Use Arbor: 2L, 6L Snap Back, 2L, 3L, 6L or 7L Standard, Applicable Materials: Aluminum, Brass, Cast Iron, Composition Board, Copper, Mild Steel, Plastic, Stainless Steel and Wood
|Type||:||Bi-Metal, Variable Pitch|
|Cutting Depth||:||1-7/8 Inch|
|TPI or Pitch||:||4/5 TPI|
|Drill Size||:||1/4 Inch Dia x 3-1/2 Inch L|
|Cutting Edge Material||:||High Speed Steel|
|Speed||:||95 - 295 Rpm|
|Use Arbor||:||2L, 6L Snap Back, 2L, 3L, 6L or 7L Standard|
|Applicable Materials||:||Aluminum, Brass, Cast Iron, Composition Board, Copper, Mild Steel, Plastic, Stainless Steel and Wood|
The Lenox tools bi-metal speed slot hole saw is a bi-metal hole saw with a patent pending speed slot on the side. The speed slot features a stair case design that allows for easy plug removal with the use a of a screw driver. The slot is wider than most and is placed lower on the hole saw with multiple leverage points to easily eject the plug . The hole saw is 10% taller than traditional hole saws to deliver cleaner cuts through two-by lumber. The speed slot efficiently removes saw dust and chips while producing a fast cut and preventing the plug from getting stuck. The saw has a high heat tolerant coating that reduces gumming and has no paint in the inside to make plug removal easier. This new design features up to twice the life of Lenox's previous model when cutting metal. An enhanced tooth geometry, a thin kerf design and the advanced coating contribute to the efficiency of the cutting process by removing material faster, therefore generating less heat while cutting.
Speed Slot® Tuff TOOTH™ Bi-Metal Variable Pitch Hole Saw, 1-3/8 Inch Dia, 1-7/8 In...
Speed Slot® Tuff TOOTH™ Bi-Metal Variable Pitch Hole Saw, 1 Inch Dia, 1-7/8 Inch C...