Cutler-Hammer Series DG Fusible General Duty Safety Disconnect Switch, 240 VAC, 15 - 25 hp at 1-Phase, 50 hp at 3-Phase
Cutler-Hammer Series DG Safety Disconnect Switch, Fusible, General Duty, 240 VAC, 15 - 25 hp at 1-Phase, 50 hp at 3-Phase, 200 A, 2-Poles, 3-Wires, 100 kA RMS Short Circuit, DPST, NEMA 3R, Surface Mount, 16 Inch W x 25-1/2 Inch H x 11-1/4 Inch D, Galvanized Steel, Painted
|Type||:||Fusible, General Duty|
|Voltage Rating||:||240 VAC|
|Power Rating||:||15 - 25 hp at 1 Phase, 50 hp at 3 Phase|
|Amperage Rating||:||200 A|
|Number of Poles||:||2|
|Number of Wires||:||3|
|Short Circuit Rating||:||100 kA RMS|
|Enclosure Type||:||NEMA 3R|
|Dimensions||:||16 Inch W x 25-1/2 Inch H x 11-1/4 Inch D|
Cutler-Hammer safety switches provide a means to manually connect or disconnect the load from the source. Fusible safety switches provide a means to manually open and close a circuit and over current protection by means of installed fuses. Also commonly referred to as a disconnect switch or disconnect, Cutler-Hammer safety switches are available from 30 - 1200 A in a variety of types: general duty ‑ For residential and commercial applications. Suitable for light duty motor circuits and service entrance from 30 - 600 A. Heavy duty ‑ For heavy commercial and industrial applications where reliable performance and service continuity are critical. Double throw ‑ used to transfer service from a normal power source to an alternate source or to switch from one load circuit to another.
Standard/Approvals: UL E5239, UL 98
Application: Commercial, Light Duty Motor Circuits, Residential and Service Entrance
Cutler-Hammer Series DG Fusible General Duty Safety Disconnect Switch, 240 VAC, 15 - 25 hp a...