Discover What The Pros Know Since 1954

Send Print
  1. pin-int

Hercules® 40120

Hercules® 40120 Cutting Oil, 1 gal Can, Petroleum, Liquid, 0.906 at 25 deg C Specific Gravity, 30-35 Centipoises

Hercules® Cutting Oil, 1 gal, Can, 30-35 Centipoises, Liquid, Composition: Sulfurized Aliphatic Hydrocarbon, Light Amber/Clear, Petroleum, 320 deg F Flash, 0.906 at 25 deg C Specific Gravity, 465 - 900 deg F

Nominal Capacity      :      1 gal
Packing Type      :      Can
Viscosity      :      30-35 Centipoises
Form      :      Liquid
Composition      :      Sulfurized Aliphatic Hydrocarbon
Color      :      Light Amber/Clear
Odor/Scent      :      Petroleum
Flash Point      :      320 deg F
Specific Gravity      :      0.906 at 25 deg C
Temperature Range      :      465 - 900 deg F

Oatey application specific lubricants for both manual and machine metal working operations. Used for sawing, drilling, turning or thread cutting with all types of metals. These are superior quality cutting oils formulated to produce consistent results under all weather conditions. Hercules cutting oils contain activated sulfur to provide anti-weld properties, reduce friction and prevent excessive heat generation, thus minimizing material expansion resulting in ill-fitting joints. The high film strength of Hercules cutting oils maintains a continuous contact of the lubricant with the work assuring quick, accurate and high quality cuts with minimal tool wear. Lubricants contain no nitrosamine forming compounds or chlorinated oils. A blend of high quality mineral oils with sulfur base. Used for cutting clean, unbroken threads during manual or low Rpm threading machine operations on small sizes of steel and brass pipe. Also applicable for hack sawing and light drilling. Will not stain copper or brass materials.

  • Contains activated sulfur-lard and extreme pressure-antiwear additives
  • Contains no nitrosamine forming compounds or chlorine additives
  • Excellent lubrication for cutting sharp threads
  • Dark cutting oil: extra heavy blend of high quality mineral oils with sulfur-lard base
  • Compounded to keep tooling and work cool when used on high speed threading machines
  • Enables operators to cut clean, sharp threads on steel or brass pipe
  • IDEAL® for thread cutting, tapping, broaching, drilling or any application where high speeds and quality finishes are required
  • Superior quality product that significantly extends tool life and reduces labor time

Standard/Approvals: NSF Registered/USDA Authorized

Application: For cutting of clean, unbroken threads during manual or low Rpm threading machine operations

  • pdfCatalog https://www.cpesupply.com//ASSETS/DOCUMENTS/ITEMS/EN/Oatey_50360_Catalog.pdf
  • pdfMSDS https://www.cpesupply.com//ASSETS/DOCUMENTS/ITEMS/EN/Hercules_40120_MSDS.pdf
  • pdfSpecification Sheet https://www.cpesupply.com//ASSETS/DOCUMENTS/ITEMS/EN/Hercules_40120_Specification_Sheet.pdf

    • Oatey® 40215
    • Oatey® 40215 Cutting Oil, 1 QT Can, Petroleum, Liquid, 0.906 at 25 deg C Specific Gravit...

    • CPEPN: 40215
    • MPN: 40215
    • UPC: 032628402157
    • SharkBite® U256LF
    • SharkBite® Series U Tube Elbow, 90 deg, 3/4 Inch, Push Fit, 200 psi, DZR Brass, 200 deg F

    • CPEPN: 34SB90
    • MPN: U256LF
    • UPC: 697285465244