Discover What The Pros Know Since 1954

Send Print
  1. pin-int

E-Box 125HS

E-Box 125HS Oil Tight Hole Seal, 1-1/4 Inch, Steel, Gray, Zinc Plated

E-Box Hole Seal, Oil Tight, 1-1/4 Inch, Steel, Zinc Plated, Gray, 2.19 Inch Dia

Type      :      Oil Tight
Trade Size      :      1-1/4 Inch
Material      :      Steel
Finish      :      Zinc Plated
Color      :      Gray
Dimensions      :      2.19 Inch Dia
  • They cover holes ranging in size from 0.19 Inch through 4 Inch, can be used on enclosures having a wall thickness up to 0.31 Inch
  • 10-21 x 5/8 Inch studs are zinc plated for steel
  • Wing nuts for steel covers are A-36 steel
  • An oil tight hole seal has a cover with 1/16 Inch flange formed around the perimeter
  • Gasket is placed over-the stud and these two parts are usually positions on-the outside of the enclosure
  • Backplate and wing nut are fastened to the seal from the inside of the enclosure
  • As the wing nut is tightened, the cover compresses the gasket and seals the hole
  • Backplates are unpainted galvanized steel
  • 1.69 Inch hole dia
  • Steel wing nuts are zinc plated with yellow dischromate rinse
  • All gaskets are oil resistance closed cell neoprene
  • Stainless steel hole seal covers are polished to a No 3 finish and backplate are T304 SS with No 2B finish
  • 1.69 Inch maximum hole diameter
  • Hole seals are fabricated from 14 ga steel with an ANSI 61 gray polyester powder coating of from 14 ga type 304 stainless steel

Standard/Approvals: UL, cUL Listed, ASA 61 Approved

Application: For used to cap unused knockout holes in box or enclosure

  • pdfCatalog https://www.cpesupply.com//ASSETS/DOCUMENTS/ITEMS/EN/E-Box_50HS_Catalog.pdf