Discover What The Pros Know Since 1954
Oatey® 2000 Plumb-Tite™ PVC Cement, Medium-Bodied, Hot, 8 oz, 510 g/L, 80 - 85 % VOC, 500 Centipoise at 73 +/-2 deg F, Liquid, Blue, 30 min at Above 60 deg F Drying, Ether-Like, 14 - 23 deg F Flash, 0.92 +/-0.02 at 20 deg C Specific Gravity, Applicable Materials: PVC, 40 - 110 deg F
| Type | : | Medium-Bodied, Hot |
| Series | : | 2000, Plumb-Tite™ |
| Nominal Capacity | : | 8 oz |
| VOC Content | : | 510 g/L, 80 - 85 % |
| Viscosity | : | 500 Centipoise at 73 +/-2 deg F |
| Form | : | Liquid |
| Color | : | Blue |
| Drying Time | : | 30 min at Above 60 deg F |
| Odor/Scent | : | Ether-Like |
| Flash Point | : | 14 - 23 deg F |
| Specific Gravity | : | 0.92 +/-0.02 at 20 deg C |
| Applicable Materials | : | PVC |
| Temperature Range | : | 40 - 110 deg F |
- Medium-bodied Blue colored cement for use on all schedules and classes of flexible and rigid PVC pipe and fittings up to 6 Inch with interference fit
- Low VOC solvent cement meets California South Coast air quality management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements
- Very fast setting cement formulated for wet conditions and/or quick pressurization and fast installation
- No primer needed on non-pressure DWV, where local codes permit
- 11.8% upper flammability limit
- 1.8% lower flammability limit
- 151 deg F boiling point
- CCCFP flash point method
- Ingredients tetrahydrofuran, methyl ethyl ketone, acetone, cyclohexanone, polymer, silica, amorphous, fumed and crystalline-free
Standard/Approvals: ASTM D2564, BAAQMD Method 40, SCAQMD 1168/316A, NSF 61 Approved, IAPMO Listed
Application: DWV, Potable Water and Sewer
MSDS