Cutler-Hammer DH362URK Heavy Duty Non-Fusible Safety Disconnect Switch, 600 VAC, 25 hp at 1-Phase, 60 hp at 3-Phases, 60 A
Cutler-Hammer Series DH Safety Disconnect Switch, Heavy Duty, Non-Fusible, 600 VAC, 25 hp at 1-Phase, 60 hp at 3-Phases, 60 A, 3-Poles, 3-Wires, 100 kA RMS Short Circuit, 3PST, Palm Fitted Red Handle Actuator, NEMA 3R, Surface/Panel Mount, 8.13 Inch W x 15.88 Inch H x 10 Inch D, Galvanized Steel, Painted
|Type||:||Heavy Duty, Non-Fusible|
|Voltage Rating||:||600 VAC|
|Power Rating||:||25 hp at 1 Phase, 60 hp at 3 Phase|
|Amperage Rating||:||60 A|
|Number of Poles||:||3|
|Number of Wires||:||3|
|Short Circuit Rating||:||100 kA RMS|
|Actuator Type||:||Palm Fitted Red Handle|
|Enclosure Type||:||NEMA 3R|
|Dimensions||:||8.13 Inch W x 15.88 Inch H x 10 Inch D|
Cutler-Hammer safety switches provide a means to manually connect or disconnect the load from the source. Fusible safety switches provide a means to manually open and close a circuit and over current protection by means of installed fuses. Also commonly referred to as a disconnect switch or disconnect, Cutler-Hammer safety switches are available from 30 - 1200 A in a variety of types: general duty ‑ For residential and commercial applications. Suitable for light‑duty motor circuits and service entrance from 30 - 600 A. Heavy‑Duty ‑ For heavy commercial and industrial applications where reliable performance and service continuity are critical. Double throw ‑ used to transfer service from a normal power source to an alternate source or to switch from one load circuit to another.
Standard/Approvals: UL E5239, UL 98/50
Application: Heavy Commercial, Industrial and Service Entrance
Cutler-Hammer DH362URK Heavy Duty Non-Fusible Safety Disconnect Switch, 600 VAC, 25 hp at 1-...