Discover What The Pros Know Since 1954
Zoeller Series 50 Mighty-Mate Effluent Pump, Automatic, 43 gpm, 1-1/2 Inch NPT Outlet, 19-1/4 ft Maximum Head, Bronze Non-Clogging Vortex Impeller, 1550 Rpm, 3/10 hp, 115/230 V, 1 Phase, 4.8 - 9.7 A, 60 Hz, 15 ft, 130 deg F, NEMA 6, Cast Iron, Powder Coated Epoxy, 10-3/32 Inch W x 10-1/16 Inch H
| Type | : | Automatic |
| Series | : | Series 50, Mighty-Mate |
| Flow Rate | : | 43 gpm |
| Outlet Size | : | 1-1/2 Inch NPT |
| Maximum Head | : | 19-1/4 ft |
| Impeller Type | : | Bronze Non-Clogging Vortex |
| Speed | : | 1550 Rpm |
| Power Rating | : | 3/10 hp |
| Voltage Rating | : | 115/230 V, 1 Phase |
| Amperage Rating | : | 4.8 - 9.7 A |
| Frequency Rating | : | 60 Hz |
| Cord Size | : | 15 ft |
| Temperature Rating | : | 130 deg F |
| Enclosure Type | : | NEMA 6 |
| Material | : | Cast Iron |
| Finish | : | Powder Coated Epoxy |
| Dimensions | : | 10-3/32 Inch W x 10-1/16 Inch H |
| Warranty | : | 3 Years |
Zoeller's model 53 mighty mate dewatering and effluent pump is a submersible watertight - dust tight unit equipped with a Non-Clogging vortex impeller. The "Mighty-Mate" series of submersible pumps is designed for use in residential or light commercial dewatering applications these durable cast iron pumps include a powder coated epoxy finish to prevent corrosion and are designed to provide great heat dissipation from the motor, ensuring a long service life. Each unit is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance.
- Float-operated, submersible, 2-pole mechanical switch and variable level, long-cycle systems available
- Corrosion-resistant, powder coated epoxy finish
- No sheet metal parts to rust or corrode
- Stainless steel screws, switch arm, guard and handle
- No screens to clog
- Watertight, neoprene square ring between motor and pump housing
- Solid, buoyant, polypropylene float
- Oil-filled, hermetically-sealed, automatic reset thermal overload protected motor
- Upper and lower sleeve bearings running in bath of oil
- Entire unit pressure-tested after assembly
- Carbon and ceramic shaft seal
- Maximum temperature for effluent or dewatering: 130 deg F (54 deg C)
- Passes 1/2 Inch (13 mm) spherical solids7-1/4 Inch (18 cm) on point, 3 Inch (8 cm) off point
- Permanently oiled bearings
- Watertight and dust tight
- Engineered thermoplastic base, engineered, glass-filled, plastic impeller with metal insert
- Stainless steel guard and handle, cast iron switch case, motor and pump housing
- Lower and upper bearings, oil-fed cast iron
- Unit ships free via UPS
Standard/Approvals: UL Listed
Application: Light Commercial and Residential Dewatering
Brochure
