Generac® 7000

Generac® Smart Management Module, For Use With: Standby Generator, 240 VAC, 50 A Resistive, 40 A Inductive, 2 Poles, Plastic, Gray, 6.17 Inch H x 7.06 Inch W x 3.70 Inch D

Generac's Smart Power Management System is designed to optimize the performance of a standby generator. The system can consist of up to 8 individual Smart Management Modules (SMM). Unlike other load management systems that depend on another control device, the SMM modules are actually selfaware and operate autonomously. Frequency is the true measure of generator engine performance and does not need to factor in increased ambient temperatures, elevation changes or generator fuel type. The modules monitor the frequency (Hz) of the power being produced by Generac's standby generators and if it falls below a certain threshold, the module will automatically follow a power management algorithm to ensure that the generator is not overloaded.

• Smart management modules are used in conjunction with the Automatic Transfer Switch to increase its power management capabilities
• It provides additional power management flexibility not found in any other power management system
• Wire-free, which makes them easier to install since no control wires are required
• Work with your transfer switch, monitoring each selected circuit and automatically supplying power where its needed
• Up to eight smart management Modules can be installed with a compatible automatic transfer switch to manage power loads
• Modules can be set to a load priority between 1-8 or even be set in a lock out only mode for loads that do not need to run in an outage, thus reducing the necessary size of the generator for a more cost effective solution
• 30 VA inrush, 6.5 VA sealed coil

Standard/Approvals: cULus Listed

• Specification Sheet 1 https://www.cpesupply.com//ASSETS/DOCUMENTS/ITEMS/EN/Generac_7042_Specification_Sheet_1.pdf
• Specification Sheet https://www.cpesupply.com//ASSETS/DOCUMENTS/ITEMS/EN/Generac_6873_Specification_Sheet.pdf