Zoeller Sump Pump, Shaded-Pole, 43 gpm, 19.25 ft Maximum Head, Non-Clogging Vortex Impeller, 1550 rpm, 115/230 V, 4.8 - 9.7 A, 60 Hz, 9 ft, 130 deg F, Cast Iron
Type |
: |
Shaded-Pole |
Flow Rate |
: |
43 gpm |
Maximum Head |
: |
19.25 ft |
Impeller Type |
: |
Non-Clogging Vortex |
Speed |
: |
1550 rpm |
Voltage Rating |
: |
115/230 V |
Amperage Rating |
: |
4.8 - 9.7 A |
Frequency Rating |
: |
60 Hz |
Cord Size |
: |
9 ft |
Temperature Rating |
: |
130 deg F |
Material |
: |
Cast Iron |
- Float-operated, submersible, 2-pole mechanical switch and variable level, long-cycle systems available
- Corrosion-resistant, powder-coated epoxy finish
- No sheet metal parts to rust or corrode
- Stainless steel screws, switch arm, guard, and handle
- No screens to clog
- Watertight, neoprene square ring between motor and pump housing
- Solid, buoyant, polypropylene float
- Oil-filled, hermetically-sealed, automatic reset thermal overload protected motor
- Upper and lower sleeve bearings running in bath of oil
- Entire unit pressure-tested after assembly
- Carbon and ceramic shaft seal
- Maximum temperature for effluent or dewatering: 130 deg F (54 deg C)
- Passes 1/2 Inch (13 mm) spherical solids
- 1-1/2 Inch NPT discharge
- Cast iron switch case, motor and pump housing
- Engineered thermoplastic base
- Engineered, glass-filled, plastic impeller with metal insert
- Stainless steel guard and handle
- Cast iron sleeve bearings
-
Installation Instruction
https://www.cpesupply.com//ASSETS/DOCUMENTS/ITEMS/EN/Zoeller_53_0033_Installation_Sheet.pdf
-
Parts List
https://www.cpesupply.com//ASSETS/DOCUMENTS/ITEMS/EN/Zoeller_53_0033_Parts_List.pdf
-
Specification Sheet
https://www.cpesupply.com//ASSETS/DOCUMENTS/ITEMS/EN/Zoeller_53_0033_Specification_Sheet.pdf